當前位置: 首頁 > 問題分類 > 計算機類考試 > 思科認證 > 問題詳情
問題

What are two characteristics of "store and forward" switching? (Select two answer choices)

A.Latency fluctuates regardless of frame. size.

B.The switch receives the complete frame. before beginning to forward it.

C.Latency through the switch varies with frame. length.

D.The switch checks the destination address upon receipt of headers.

參考答案
正確答案:BC
解析:Explanation:
With store-and-forward, the entire frame. is received by the switch before the first bit of the frame. is forwarded. As soon as the incoming switch port receives enough of the frame. to see the destination MAC address, the forwarding decision is made and the frame. is transmitted out the appropriate outgoing port to the destination device. So, each frame. might experience slightly less latency. Store and forward switching may add latency when compared to other switching methods such as cut through, but it can reduce the amount of errors that become forwarded through a network.

Incorrect Answers:
A. The amount of latency that is introduced with this method of switching is dependent on the size of the frame, as the switch must wait to receive the entire frame. before sending it.

D. The switch must wait for the entire frame. before forwarding it on, and not just the headers.
您可能感興趣的試題
  • 以下不屬于動態路由協議的是()

    A.RIP

    B.ICMP

    C.IS-IS

    D.OSPf

  • 關于RIP協議描述正確的是()。

    A.距離矢量路由協議

    B.鏈路狀態路由協議

    C.有RIPv1和RIPv2兩個版本

    D.都使用廣播發送,支持驗證和VLSM

  • OSPF協議生成的路由分為四類,按優先級從高到低順序來說分別是:區域內路由、區域間路由、第一類外部路由、第二類外部路由。

    此題為判斷題(對,錯)。

  • How can a Ezonexam administrator determine if a router has been configured when it is first powered up?

    A.A configured router prompts for a password

    B.A configured router goes to the privileged mode prompt

    C.An un configured router goes into the setup dialog

    D.An un configured router goes to the enable mode prompt

×
驗證
新疆十一选五和值表